Disposable Medical 100% Silicone Stomach Tube for Adult and Kids

Product Description

Silicone Stomach Tube

 

Stomach tube is inserted from the nostril or oral cavity, through the stomach tube from the pharynx to the stomach through the esophagus, mostly used for pumping gastric juice, gastric lavage when acute poisoning, can also be used to inject liquid to and from the stomach to provide patients with necessary food and nutrition, care should be paid attention to avoid gastric tube pollution, and gastric tube propulsive, resulting in aspiration.


Product Description:
1.Made of 100% medical grade silicone, the tube is soft and clear;
2.X-ray opaque line through the whole tube;
3.Clear depth marks on the tube.

 

Method of use:
Position client while intubating and clean and lubricate nasal cavity. Tilt client's head back and insert the gastric tube at an Angle of 60° from the nostril, continuing to the nasopharynx; When the gastric tube was inserted to 15CM (pharynx),1ml sterilized paraffin oil was dropped along the outer wall of the gastric tube, and the patient's head was held up so that the lower jaw was pressed against the chest wall to increase the radian of the throat, so that the gastric tube could slide along the back wall and smoothly enter the esophagus through the throat. At this point, the patient is instructed to slowly insert the gastric tube to the desired length while swallowing and then fix it.

Then check if the tube is in the stomach. After the gastric tube is successfully inserted, the gastric tube should be properly fixed. The method is: At the nostril, a tape of about 3cm in length is first used to circle the gastric tube twice as a mark, and then a 6-7cm tape is used to cross and fix the alar of the nose. Then a prepared tape of about 50-60cm in length (belt width: 1.5cm) is used to tie a knot around the gastric tube at the nostril (the knot does not affect the drainage of the gastric tube), and then the tape is bypassed on both sides of the patient's head. A slip-knot is tied on one side to strengthen and fix the gastric tube.

Model size:

Product NO.	Size(Fr)	Length(mm)	Remark
ST08S	8	700 700	Disposable
ST10S	10
ST12S	12	1200 1200 1200 1200
ST14S	14
ST16S	16
ST18S	18

 

    The factory of Fushan Medical covers an area of 13,000 sqms. Both class 10,000 and class 100,000 clean workshops are designed and constructed according to GMP
standards. With various precise manufacture and inspection facilities, Fushan provides different kinds of medical devices by silicone, polyurethane (PU) and polyvinyl chloride(PVC).

    Meanwhile, Fushan designed and built professional lals for sterile, physicochemical and electrical tests. It also equipped with CE verified ETO sterilization chamber.
Sterilization verification report can be issued as request.

 

 

1: Q: What kind certificate you have? 
A: We are a professional manufacturer and we have CE, ISO, SGS and other certificate for your market.

 2: Q: Where is your factory located? How can I visit there?

A: Our factory is located in Lin'an District, Hangzhou City, Zhejiang Province, China.
It's takes 3 hours from Shanghai airport and 1.5 hours from Hangzhou East Railway Station. We can pick you up if you need, welcome to visit our factory.

 

 3: Q: What is the normal package of your products? 

A: Usually our package is blank paper-plastic bag. OEM package is available. 

 

 4: Q: Can you make samples? 

A: If you need some samples, you can contact with us. We can provide sample productions and delivery services. 

 

 5. Q: How does your factory do as quality control?

 A: We believe the quality to win credibility, reputation to benefit so there are inspectors in different post and we have material inspection, process inspection, and full inspection before shipment to ensure excellent quality. 

 

 6. Q: How do you send the goods to us?

 A: For big volume, we can deliver by sea or air; For small volume, we can send by express. 

 

 7. Q: How can I get a price of needed product?

 A: You can give us your exactly specs details and we can give you a sample and price according to your specification or you can send us a sample and we can give you a counter sample and price according to your sample . 

 

 8. Q: Can you make OEM service?

 A: Yes. We can provide OEM&ODM service. 

 

9. Q: I am a small wholesaler,do you accept small order?
A: We can accept small order or trial order as long as it meets our MOQ and we would like to grow up with you together. 

 

10. Q: What about the leading time for the mass production?

 A: Our leading time is depends on the order quantity and the season you place the order, usually in 30-45 days.